Diamond Pro-Am Pool Table

The Diamond Paragon table features the elegance of a home table with the legendary playability of a Diamond tournament table. Constructed of Solid Hardwood Maple stained to suit your preference with Diamonds trade mark wedge leveling system keeps the 1″ thick slate level and playing consistent. Bi-level leather top pocket design mounted flush to the rails keeps your hand flush with the rail tops when shooting close to the rail edge. Top Rated Artemis Rubber rails and Simonis 860 HR felt will have your table playing at a pro level as you’d expect from a Diamond!

The DIAMOND PRO-AM is the perfect table for “League Players” to enjoy and improve their game. The DIAMOND PRO-AM is shipped from the factory fully assembled. This one-piece slate table must be installed on the ground level. Three-piece slate is available for basement or upstairs installation.

Massive 7” rail construction utilizing six pieces of solid Oak or Ash hardwood butcher-blocked together. One piece of poplar is used in the front portion of rail. This construction prevents warping.

Poplar wood is used in the front of the rail to glue the cushion rubber directly to the sub-rail. Poplar accepts staples easier than other wood types when covering cushions with cloth. ¼” feather strip channel is cut into the top of rail for securing cloth over the top side of the cushion then stapled to the bottom side of the poplar wood.

Burn and dent resistant PRC material is glued on the top and side of the butcher-block rail system for extreme durability. K-55 profile cushions are “glued” (not bolted) directly to the rail system for consistent rebound and optimum playability.

 

8 REASONS TO BUY A PRO-AM

 

1. SLATE
7′, 8′, and 9′ table are equipped with 1″ 1-piece slate and also available in a 3-piece slate for lower and upper floor installation.

2. CLOTH – SIMONIS 860 TOURNAMENT GRADE

Available in a wide assortment of Simonis Cloth colors

 

3. RAILS
Available in Oak with 5 stains choices and Black PRC.  To completely understand the difference and benefits of each please call Manning to discuss in detail. Four 3/8″ bolts lock slate to each rail for solid immovable performance. Diamond inlaid sights are 3 11/16″ from tip of rubber to center of diamond and perfectly matched. Rail top is rounded to allow better rail shots and 7¼ wide (rubber to edge of rail) for a stable bridge hand. NO metal ornamentation to catch on clothing or damage cues.
4. CUSHIONS
Tour specified K-55 profile offers a quick response. An additional ¼” top rail backing wood has been engineered between the cushion and the feather strip channel to provide consistent rail speed. 7 & 8ft tables feature Black Diamond Rubber while the 9ft tables feature Artemis Rubber for the increased play surface length and width.

 

5. POCKETS
Patent pending bi-level design is flush to the rail. Shooting out of the pocket is just as easy as shooting off the rail.

 

6. WEDGE LEVELING SYSTEM
Matchless wedge leveling system built right into the slate bed. Allows the slate to be leveled without removing the rail system.

 

7. BALL RETURN
Extremely quiet and efficient ball return. Pocketed balls are collected in the center of the table, then gravity fed to tail end of the table. Access doors allow for entry into ball return to remove any foreign objects effortlessly.

 

8. FEET
Leveling block is built right into the leg of the Pro-Am. As the ¾” nut is turned, each leg can be raised or lowered with ease for precise leveling.

 

TABLE SIZES, DIMENSIONS & WEIGHT

9′ DIMENSIONS: (Exterior 114″ X 64″ X 32″ ) (Play Area 50″ X 100″ )  WEIGHT: 1200LBS

8′ DIMENSIONS: (Exterior 104″ X 59″ X 32″) (Play Area 45″ X 90″) WEIGHT: 1000LBS

7′ DIMENSIONS: (Exterior 94″ X 54″ X 32″) (Play Area 40″ X 80″) WEIGHT: 800LBS

 

DIAMOND PRO-AM FEATURES

PRC rails are burn and dent resistant
Bi-Level Pocket Design
22 Leveling Points for Perfect Leveling
Unique “No Lift” Leveling System
One Piece, 1′ thick Premium Grade Slate
Extremely Quiet and Fast Ball Return

THE PRO-AM QUALIFIES FOR A DISCOUNT ON A NEW DIAMOND LIGHT

Matching DIAMOND Light Unit ( 7 tables receive a 7ft light – 8ft & 9ft tables receive a 9ft light )

SHIPPING & INSTALLATION

Shipping & Installation not included in base price
Diamond tables are manufactured in Jeffersonville, Indiana.
If shipping the table out of the USA, Duties, and Brokerage will be extra.
Light assembly, installation, and bulbs are the responsibility of the proprietor.

Interested in this product?

Fill out the form below to ask a question or get a quote.

Diamond Paragon Pool Table

Customize Your Table for a Quote

This field is hidden when viewing the form
This field is hidden when viewing the form
This field is hidden when viewing the form
Please enter a number from 1 to 9999.

Your Information

Name(Required)
Address(Required)